HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 116
Disabling Network Protocols, Upgrading the Integrated Administrator Firmware
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Performing Advanced Functions Disabling Network Protocols To modify the supported communications protocols of the enclosure using the Webbased user interface: 1. Click the Enclosure tab. 2. Click Network Configuration in the left panel. 3. Select the appropriate radio buttons in the Protocols area. 4. Click Apply. To modify the supported communications protocols of the enclosure using the CLI, choose from among the following commands: ■ To disable http/https communication, type: DISABLE WEB Disabling http/https causes the users to lose access to the Web-based user interface. ■ To disable automatic time updates, type: DISABLE NTP ■ To disable SNMP communication, type: DISABLE SNMP ■ To disable Secure Shell communication, type: DISABLE SECURESH Disabling Secure Shell causes the users to lose access to the Web-based user interface. ■ To disable telnet communication, type: DISABLE TELNET Upgrading the Integrated Administrator Firmware The firmware associated with the Integrated Administrator can be upgraded remotely using the CLI using the management (10/100 Ethernet) connector located on the rear panel of the enclosure. UPDATE IMAGE The can be any of the following: ■ http://host/path 8-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide