HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 87
Enabling Remote Console Sessions to Blade PCs, Setting Up AlertMail
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Setting Up the System To add a user using the CLI, type the following commands sequentially: ADD USER {} ✎ The must be unique to all other user names and group names and is case-sensitive. It must be 1-13 characters long and can include all alphanumeric characters, the dash, and the underscore. The must be 3-8 characters long and includes all printable characters. ASSIGN ADMINISTRATOR {RIGHTS} SET USER FULLNAME {} ✎ The must be 0-20 characters long and can include all alphanumeric characters, the dash, the underscore, and spaces. SET USER CONTACT {} ✎ The must be 0-20 characters long and can include all alphanumeric characters, the dash, the underscore, and spaces. ASSIGN USER {[VIEW | MODIFY]} Enabling Remote Console Sessions to Blade PCs The remote console feature of the Integrated Administrator enables a user to connect to the console (serial) connector of the blade PC in order to access the ROM-Based Setup Utility (RBSU). Accessing the RBSU of the blade PC requires nothing more than connecting to the blade PC. For detailed instruction to perform this task, see Chapter 7, in section "Accessing the ROM-Based Setup Utility for a blade PC." Setting Up AlertMail AlertMail enables users to receive system events by e-mail instead of using SNMP traps. AlertMail is completely independent from SNMP and both can be enabled at the same time. AlertMail uses standard SMTP commands to communicate with an SMTP capable mail server. AlertMail Commands Function Command Add an e-mail address using command line interface SET ALERTMAIL MAILBOX Add an SNMP server address SET ALERTMAIL SMTPSERVER Set the sender domain SET ALERTMAIL SENDERDOMAIN Enable Alertmail ENABLE ALERTMAIL Disable Alertmail DISABLE ALERTMAIL * For security reasons, some SMTP servers will only forward mail if the sender's domain is set properly. You may need to set this parameter to match the network domain. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 6-11