HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 33
Virtual Buttons
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Web Browser Interface SNMP Configuration Field Descriptions (continued) Community Strings and Trap Destinations Area Read Community Up to 20 characters including all alphanumeric, dash, underscore, and space characters Displays the SNMP read community string If this is left blank, "public" is assigned. For the default read Community string, see Appendix E, "Factory Default Settings." Write Community Up to 20 characters including all alphanumeric, dash, underscore, and space characters Sets the SNMP write community string If this is left blank, SNMP SET commands are disabled. For the default write Community string, see Appendix E, "Factory Default Settings." Add Adds an IP address to the list of trap destinations. Remove Removes the selected IP addresses from the list of trap destinations. Virtual Buttons ✎ Only enclosure administrators can execute these commands. The Virtual Buttons screen (shown below) enables an enclosure administrator to modify the power state of the enclosure and Unit Identification LED from a remote location to facilitate troubleshooting by technicians in the data center. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-11