HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 96
Powering Off the Blade PC
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Performing Common Administrative Tasks 4. Click Console Log under Bay Information. To view the system log for a blade PC using the CLI, type: SHOW SYSLOG BAY ✎ Entering q quits the command. Typing any other key shows the next screen if more information is available to display. The system log of the blade PC is not stored between reboots, so the information only includes what has taken place since the last power-on of the Integrated Administrator. Powering Off the Blade PC Ä CAUTION: Without the blade PC health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shutdown a blade PC. This condition may result in the permanent loss of critical data. Ä CAUTION: Rebooting or powering off the blade PC removes all power from the blade PC and ends all open sessions. ✎ This task can only be performed for a given blade PC bay by enclosure administrators and group administrators with access rights to the blade PC bay. To reboot or power off the blade PC using the Web-based user interface: 1. Click the Bays tab. 2. Click Bay List in the left panel. 3. Click the blade PC whose power state to modify. 4. Click Virtual Buttons at the bottom of the screen. 5. Click Reboot, Power Off or Power Off Immediately. 6. Click Apply. 7-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide