HP Chromebook 14-q000 Maintenance and Service Guide - Page 35
Remove the Phillips PM2.5×4.5 screw, Remove the battery
View all HP Chromebook 14-q000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Remove the battery: 1. Disconnect the battery cable from the system board. 2. Remove the Phillips PM2.5×4.5 screw (1) that secures the battery to the base enclosure. 3. Lift the left side of the battery (2) until the battery is clear of the alignment post (3) in the middle of the battery. 4. Release the battery (4) by sliding it to the left. Component replacement procedures 29
Remove the battery:
1.
Disconnect the battery cable from the system board.
2.
Remove the Phillips PM2.5×4.5 screw
(1)
that secures the battery to the base enclosure.
3.
Lift the left side of the battery
(2)
until the battery is clear of the alignment post
(3)
in the middle of
the battery.
4.
Release the battery
(4)
by sliding it to the left.
Component replacement procedures
29