HP Chromebook 14-q000 Maintenance and Service Guide - Page 61
and the heat sink, Following the 1 through 4 sequence stamped into the heat sink
View all HP Chromebook 14-q000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
d. Hall sensor board (see Hall sensor board on page 39) e. System board (see System board on page 52) Remove the heat sink: 1. Turn the system board upside down, with the rear toward you. 2. Following the 1 through 4 sequence stamped into the heat sink, loosen the four Phillips captive screws (1) that secure the heat sink to the system board. 3. Remove the heat sink (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink and the system board components, it may be necessary to move the heat sink from side to side to detach it. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the system board (1) and the heat sink (2) each time the heat sink is removed. Replacement thermal material is included with the heat sink and system board spare part kits. Component replacement procedures 55