HP Cisco Catalyst Blade Switch 3020 Release Notes for Cisco Catalyst Blade Swi - Page 19

Documentation Updates sync vlan_assign voice webauth (Optional) Display operational synchronization authentication manager debug messages. (Optional) Display the VLAN-assignment debug messages. (Optional) Display the voice-VLAN debug messages. (Optional) Display web authentication manager debug messages. Defaults Authentication debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(50)SE Modification This command was introduced. Usage Guidelines The undebug authentication command is the same as the no debug authentication command. Related Commands Command Description authentication control-direction Configures the port mode as unidirectional or bidirectional. authentication event Sets the action for specific authentication events. authentication fallback Configures a port to use web authentication as a fallback method for clients that do not support IEEE 802.1x authentication. authentication host-mode Sets the authorization manager mode on a port. authentication open Enables or disables open access on a port. authentication order Sets the order of authentication methods used on a port. authentication periodic Enables or disables reauthentication on a port. authentication port-control Enables manual control of the port authorization state. authentication priority Adds an authentication method to the port-priority list. authentication violation Configures the violation modes that occur when a new device connects to a port or when a new device connects to a port after the maximum number of devices are connected to that port. show authentication Displays information about authentication manager events on the switch. OL-18274-02 Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later 19