HP Cisco Catalyst Blade Switch 3020 Release Notes for Cisco Catalyst Blade Swi - Page 22

Documentation Updates Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit. Explanation The system has shut down the specified interface because too many hosts have requested access to that interface. [chars] is the interface name. Recommended Action To enable the interface, remove the excess hosts, and enter the no shutdown interface configuration command. Error Message VQPCLIENT-3-VLANNAME: Invalid VLAN [chars] in response. Explanation The VLAN membership policy server (VMPS) has specified a VLAN name that is unknown to the switch. [chars] is the VLAN name. Recommended Action Ensure that the VLAN exists on the switch. Verify the VMPS configuration by entering the show vmps privileged EXEC command. Error Message WCCP-5-CACHEFOUND: Web Cache [IP_address] acquired. Explanation The switch has acquired the specified web cache. [IP_address] is the web cache IP address. Recommended Action No action is required. Error Message WCCP-1-CACHELOST: Web Cache [IP_address] lost. Explanation The switch has lost contact with the specified web cache. [IP_address] is the web cache IP address. Recommended Action Verify the operation of the web cache by entering the show ip wccp web-cache privileged EXEC command. Deleted System Messages Error Message ACLMGR-2-NOVMR: Cannot create VMR data structures for access list [chars]. Error Message DOT1X-5-INVALID_INPUT: Dot1x Interface parameter is Invalid on interface [chars]. Error Message DOT1X-5-SECURITY_VIOLATION: Security violation on interface [chars], New MAC address [enet] is seen. Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or shutdown VLAN [dec] to 802.1x port [chars] Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later 22 OL-18274-02