HP Color LaserJet 9500 HP Color LaserJet 9500nand 9500hdn - User Guide - Page 68
Cleaning the fuser input area
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
http://www.hp.com/support/lj9500 Cleaning the fuser input area Occasionally, toner and paper dust collects in the fuser input and can affect print quality. Use the following procedure to clean the fuser input. 1 To clean the fuser input area 1 Open the front doors of the printer, and then swing the large green lever down. 2 On the front side of the printer, locate the blue transfer-roller handle beneath the large green lever. Grasp the handle and pull the roller out of the printer. Set the roller on a clean, flat surface. 2 CAUTION Do not touch the black foam roller, and take care not to scratch the underside of the image transfer belt as you remove the roller from the printer. 66 Chapter 4 - Improving print quality Rev. 1.0
66
Chapter 4 – Improving print quality
Rev. 1.0
Cleaning the fuser input area
Occasionally, toner and paper dust collects in the fuser input and can affect print quality. Use the following procedure to
clean the fuser input.
To clean the fuser input area
1
Open the front doors of the printer, and then swing the large green lever
down.
2
On the front side of the printer, locate the blue transfer-roller handle
beneath the large green lever. Grasp the handle and pull the roller out of the
printer. Set the roller on a clean, flat surface.
CAUTION
Do not touch the black foam roller, and take care not to scratch the
underside of the image transfer belt as you remove the roller from the
printer.
1
2