HP DL165 HP ProLiant DL165 Generation 5 Software Configuration Guide - Page 14

Table 6 IDE Configuration submenu fields Field Description Options Onboard PCI IDE Controller Set this value to allow the computer system to detect the Primary Both and Secondary IDE channels. This includes both the Primary Master, Primary Slave, Secondary Master, and Secondary Slave. Set this value to allow the computer system to detect only the Primary Primary IDE channel. This includes both the Primary Master and the Primary Slave. Set this value to prevent the computer system from using the onboard IDE controller. Disabled Set this value to allow the computer system to detect only the Secondary IDE channel. This includes both the Secondary Master and the Secondary Slave. Secondary Hard Disk Write Protect Set this value to allow the hard disk drive to be used normally. Disabled Read, write, and erase functions can be performed to the hard disk drive. This is the default setting. Set this value to prevent the hard disk drive from being erased. Enabled IDE Detect Time Out(Seconds) This value is the best setting to use if the onboard IDE controllers 0 are set to a specific IDE disk drive in the BIOS Set this value to stop the setup from searching the IDE bus for IDE 5 disk drives in 5 seconds. Set this value to stop the setup from searching the IDE bus for IDE 10 disk drives in 10 seconds Set this value to stop the setup from searching the IDE bus for IDE 15 disk drives in 15 seconds Set this value to stop the setup from searching the IDE bus for IDE 20 disk drives in 20 seconds Set this value to stop the setup from searching the IDE bus for IDE 25 disk drives in 25 seconds Set this value to stop the setup from searching the IDE bus for IDE 30 disk drives in 30 seconds 35 is the default value. It is the recommended setting when all IDE 35 connectors are set to AUTO in the setup setting System BIOS configuration 14