HP DL165 HP ProLiant DL165 Generation 5 Software Configuration Guide - Page 25
USB Configuration submenu, Table 17, Field, Description, Options
![]() |
UPC - 884962026601
View all HP DL165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
USB Configuration submenu Figure 19 USB Configuration submenu NOTE: When you install USB storage, there is display USB Mass Device Configuration item. From this item, you can get some information about the device, some information you can configure if you need. Table 17 USB Configuration submenu fields Field Description USB Controller This setting allows the use of the USB function. This is the default setting. This setting makes the onboard USB function unavailable. USB 2.0 Controller This setting allows the use of USB ports transfer data in 480Mbps. This is Mode the default setting This setting allows the use of USB ports transfer data in 12Mbps. BIOS EHCI Hand- Set this value to support the EHCI-off. This is default value. Off Set this value to not allow support the EHCI-off. Options Enabled Disabled HiSpeed FullSpeed Enabled Disabled System BIOS configuration 25
![](/manual_guide/products/hewlettpackard-dl165-hp-proliant-dl165-generation-5-software-configuration-guide-0e7289e/25.png)