HP DL165 HP ProLiant DL165 Generation 5 Software Configuration Guide - Page 60
In the I/O Device Configuration submenu, set the Serial port Mode field to BMC. See the I/O
UPC - 884962026601
View all HP DL165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
To revert to using DHCP to set the IP address, type set oemhp_dhcp_enable=TRUE to enable DHCP.The system takes a few seconds to set the new IP address. 12. Open a browser and enter the IP address that you set manually or that was set automatically using DHCP. 13. When prompted, enter the same user name and password you used in your terminal session. 14. Browse the server settings using the user interface that displays. To enable console redirection via the Setup Utility: 1. In the I/O Device Configuration submenu, set the Serial port Mode field to BMC. See the "I/O Device Configuration submenu" section for more information. 2. In the Console Redirection submenu, set the Com Port Address to On Board Com Port A. See the "Console Redirection submenu fields" section for more information. 3. Press F10 to Save and Exit. Server management 60