HP Designjet 130 Quick Reference Guide - Page 21

English HP Designjet 130/130nr Printer - Quick Reference Guide How Do I Replace the Printheads? (continued) ...continued from previous page... 6. Finally close the rear part and then the front part of the outer flap. Note that after closing the flap, the printer will automatically perform some internal calibrations on the printhead, and then alignment. There must be paper in the tray during alignment (you can use your least expensive paper). Prealignment calibrations may take some time, especially if multiple printheads are replaced. 7. Check that the printhead icon on the front panel is no longer flashing. The printhead has been replaced successfully. Perform a color calibration, as described in "How Do I Perform a Color Calibration?" on page 3. For more detailed instructions for replacing a printhead, see the topic How do I replace printheads? on the Using Your Printer CD. 19