HP Deskpro 300 Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 12
Compaq Deskpro Workstation 300 Hardware Reference Guide
View all HP Deskpro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
7. While holding the drive casing, gently pull the drive out of the drive bay. CAUTION: When removing a drive, do not pull the drive from the front of the drive bay. To prevent damage to the drive bezel, push the drive from the rear for removal from the front of the drive bay. 8. After placing the workstation in the desktop position, gently slide the drives back into the bay. Installing the drives CAUTION: The use of unnecessary force when installing the drive may result in damage to the drive. ✎ Always place the diskette drive in the bay nearest the top of the chassis (bay 3) in the desktop configuration to ensure proper drive clearance and access. When all of the drives are properly inserted, the drivelock will secure the drives in place. 9. Reconnect the power and data cables to the drives as labeled. Compaq Deskpro Workstation 300 Hardware Reference Guide 1-7