HP Deskpro 300 Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 13

Compaq Confidential - Need to Know Required, Product Features

Get HP Deskpro 300 PDF manuals and user guides View all HP Deskpro 300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

10. Remove the subpanel 1 as described in "Removing the Bezel Blank" in Chapter 2, and reposition the subpanel 2 with the bezel blank in the proper orientation for the desktop configuration. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. 1-8 Product Features Changing from a minitower to a desktop configuration ✎ When converting from a minitower to a desktop orientation, use the replacement subpanel that was shipped with your workstation to ensure that the Compaq logo is properly oriented. 11. Replace the subpanel, front bezel, and the workstation access panel. Be sure that the subpanel and front bezel align properly with the alignment tabs. 12. Reconnect the power cord to the grounded AC outlet, then reconnect the network cable and any external devices to the system.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
1-8
Product Features
Compaq Confidential - Need to Know Required
10. Remove the subpanel
1
as described in “Removing the Bezel
Blank” in Chapter 2, and reposition the subpanel
2
with the bezel
blank in the proper orientation for the desktop configuration.
CAUTION:
Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.
Changing from a minitower to a desktop configuration
When converting from a minitower to a desktop orientation,
use the replacement subpanel that was shipped with your
workstation to ensure that the Compaq logo is properly
oriented.
11. Replace the subpanel, front bezel, and the workstation access
panel. Be sure that the subpanel and front bezel align properly with
the alignment tabs.
12. Reconnect the power cord to the grounded AC outlet, then
reconnect the network cable and any external devices to the
system.