HP Dragonfly 13.5 Maintenance and Service Guide - Page 57

Solid-state drive, WARNING, IMPORTANT

Get HP Dragonfly 13.5 PDF manuals and user guides View all HP Dragonfly 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

2. Remove the bottom cover (see Bottom cover on page 48). WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. IMPORTANT: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before you remove the battery. Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Remove the five Phillips M2.0 × 3.9 screws (2) that secure the battery to the computer. 3. Remove the battery (3) from the computer. To install the battery, reverse the removal procedures. Solid-state drive To remove the solid-state drive, use this procedure and illustration. Table 5-3 Solid-state drive descriptions and part numbers Description 2 TB, M.2 2280, PCIe-4×4, ZTurbo solid-state drive with TLC 1 TB, 2280, PCIe-4×4, NVMe solid-state drive with TLC 1 TB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC 512 GB, M.2 2280, PCIe-4×4, NVMe, solid-state drive 512 GB, 2280, PCIe-4×4, NVMe solid-state drive with TLC 512 GB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC 256 GB, M.2 2280, PCIe, NVMe, value solid-state drive 256 GB, M.2 2280, PCIe-4×4, NVMe, SED solid-state drive Spare part number M52027-001 M16560-001 N23415-001 N45476-001 M17436-001 M52031-001 M11042-001 M35225-001 Solid-state drive 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
2.
Remove the bottom cover (see
Bottom cover
on page
48
).
WARNING!
To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Remove the five Phillips M2.0 × 3.9 screws
(2)
that secure the battery to the computer.
3.
Remove the battery
(3)
from the computer.
To install the battery, reverse the removal procedures.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-3
Solid-state drive descriptions and part numbers
Description
Spare part number
2 TB, M.2 2280, PCIe-4×4, ZTurbo solid-state drive with TLC
M52027-001
1 TB, 2280, PCIe-4×4, NVMe solid-state drive with TLC
M16560-001
1 TB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC
N23415-001
512 GB, M.2 2280, PCIe-4×4, NVMe, solid-state drive
N45476-001
512 GB, 2280, PCIe-4×4, NVMe solid-state drive with TLC
M17436-001
512 GB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC
M52031-001
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive
M11042-001
256 GB, M.2 2280, PCIe-4×4, NVMe, SED solid-state drive
M35225-001
Solid-state drive
51