HP Dragonfly 13.5 Maintenance and Service Guide - Page 76

NFC module cable, Before removing the NFC module cable, follow these steps

Get HP Dragonfly 13.5 PDF manuals and user guides View all HP Dragonfly 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

4. Remove the transfer board cable (see Transfer board cable on page 68). Remove the transfer board: 1. Release the ZIF connector (1) the touchpad cable is connected to, and then disconnect the touchpad cable from the transfer board. 2. Release the ZIF connector (2) the NFC module cable is connected to, and then disconnect the NFC module cable from the transfer board. 3. Release the ZIF connector (3) the backlight cable is connected to, and then disconnect the backlight cable from the transfer board. 4. Remove the transfer board (4). To install the transfer board, reverse this procedure. NFC module cable To remove the NFC module cable, use this procedure and illustration. NOTE: The NFC module cable is included in the Cable Kit, spare part number tbd-001. Before removing the NFC module cable, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 48). 2. Remove the bottom cover (see Bottom cover on page 48). 3. Remove the battery (see Battery on page 50). Remove the NFC module cable: 1. Release the ZIF connector (1) the NFC module cable is connected to, and then disconnect the NFC module cable from the transfer board. 70 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
4.
Remove the transfer board cable (see
Transfer board cable
on page
68
).
Remove the transfer board:
1.
Release the ZIF connector
(1)
the touchpad cable is connected to, and then disconnect the
touchpad cable from the transfer board.
2.
Release the ZIF connector
(2)
the NFC module cable is connected to, and then disconnect the NFC
module cable from the transfer board.
3.
Release the ZIF connector
(3)
the backlight cable is connected to, and then disconnect the
backlight cable from the transfer board.
4.
Remove the transfer board
(4)
.
To install the transfer board, reverse this procedure.
NFC module cable
To remove the NFC module cable, use this procedure and illustration.
NOTE:
The NFC module cable is included in the Cable Kit, spare part number tbd-001.
Before removing the NFC module cable, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
48
).
2.
Remove the bottom cover (see
Bottom cover
on page
48
).
3.
Remove the battery (see
Battery
on page
50
).
Remove the NFC module cable:
1.
Release the ZIF connector
(1)
the NFC module cable is connected to, and then disconnect the NFC
module cable from the transfer board.
70
Chapter 5
Removal and replacement procedures for authorized service provider parts