HP Dragonfly 13.5 Maintenance and Service Guide - Page 73
Touchpad, Before removing the touchpad, follow these steps
View all HP Dragonfly 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
2. Release the ZIF connector (2) the touchpad cable is connected to, and then disconnect the touchpad cable from the touchpad. 3. Remove the touchpad cable (3) from the computer. To install the touchpad cable, reverse this procedure. Touchpad To remove the touchpad, use this procedure and illustration. NOTE: The touchpad spare part kit includes touchpad. Table 5-11 Touchpad descriptions and part numbers Description Spare part number Touchpad: In natural silver finish N08577-001 In slate blue finish N08578-001 NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is included in the Cable Kit, spare part number tbd-001. Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 48). 2. Remove the bottom cover (see Bottom cover on page 48). 3. Remove the battery (see Battery on page 50). 4. Remove the touchpad cable (see Touchpad cable on page 66). Remove the touchpad: Touchpad 67