HP Dx5150 Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 25
Reassembling the, Computer, card, install an expansion slot cover to close the open slot.
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Hardware Upgrades 4. Remove the screw on the slot cover retention latch and pull the slot cover retention latch up. 5. Hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket 1 then away from the inside of the chassis 2 to release it from the chassis frame. Be sure not to scrape the card against the other components. Removing an Expansion Card from a Standard Expansion Socket 6. Store the card in anti-static packaging. 7. If not replacing the old expansion card with a new expansion card, install an expansion slot cover to close the open slot. 8. Slide the slot cover lock down to secure the expansion cards and expansion slot covers. Ä CAUTION: All expansion card slots on the rear of the computer must contain either an expansion card or slot cover for proper cooling of internal components during operation. 9. Complete the procedure described in the "Reassembling the Computer" section of this chapter. Hardware Reference Guide www.hp.com 2-15