HP ENVY 13-ad000 Maintenance and Service Guide - Page 39
Two Torx5 M2.0×3.2 screws, Four Phillips PM2.0×6.1 screws
![]() |
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
1. Remove the computer rubber foot strip (1). The rubber foot strip is available using spare part numbers 928496-001 (in natural silver finish) and 928495-001 (in silk gold finish). 2. Remove the following screws that secure the bottom cover to the computer: (2) Four Phillips PM2.0×6.1 screws (3) Two Torx5 M2.0×3.2 screws 3. Insert a case utility tool (1) or similar thin, plastic tool into the front corners of the bottom cover. 4. Separate the bottom cover (2) from the keyboard/top cover. 5. Remove the bottom cover (3). Component replacement procedures 31
![](/manual_guide/products/hewlettpackard-envy-13ad000-maintenance-service-guide-e7dd309/39.png)
1.
Remove the computer rubber foot strip
(1)
.
The rubber foot strip is available using spare part numbers 928496-001 (in natural silver
finish)
and
928495-001 (in silk gold
finish).
2.
Remove the following screws that secure the bottom cover to the computer:
(2)
Four Phillips PM2.0×6.1 screws
(3)
Two Torx5 M2.0×3.2 screws
3.
Insert a case utility tool
(1)
or similar thin, plastic tool into the front corners of the bottom cover.
4.
Separate the bottom cover
(2)
from the keyboard/top cover.
5.
Remove the bottom cover
(3)
.
Component replacement procedures
31