HP ENVY 13-ad000 Maintenance and Service Guide - Page 40
Bottom cover retention hooks, Reverse this procedure to install the bottom cover.
![]() |
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reverse this procedure to install the bottom cover. Bottom cover retention hooks Description For use only on computer models equipped with a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 928491-001 928492-001 Before removing the bottom cover retention hooks, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). Remove the bottom cover retention hooks: 1. Turn the bottom cover right side up. 2. Remove the two Phillips PM2.0×2.0 screws (1) that secure the bottom cover retention hooks to the bottom cover. 3. Remove the bottom cover retention hooks (2). Reverse this procedure to install the bottom cover retention hooks. 32 Chapter 5 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-envy-13ad000-maintenance-service-guide-e7dd309/40.png)