HP ENVY 13-ad000 Maintenance and Service Guide - Page 52

TouchPad cable, Remove the TouchPad cable

Get HP ENVY 13-ad000 PDF manuals and user guides View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

TouchPad cable NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available using spare part numbers 928451-001 (for use only on computer models equipped with a graphics subsystem with discrete memory) and 928452-001 (for use only on computer models equipped with a graphics subsystem with UMA memory). Before removing the TouchPad cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 33). Remove the TouchPad cable: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad. 3. Release the piece of tape (3) that secures the TouchPad cable to the keyboard/top cover. 4. Remove the TouchPad cable (4). Reverse this procedure to install the TouchPad cable. 44 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
TouchPad cable
NOTE:
The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available
using spare part numbers 928451-001 (for use only on computer models equipped with a graphics
subsystem with discrete memory) and 928452-001 (for use only on computer models equipped with a
graphics subsystem with UMA memory).
Before removing the TouchPad cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
30
).
5.
Remove the battery (see
Battery
on page
33
).
Remove the TouchPad cable:
1.
Release the ZIF connector
(1)
to which TouchPad cable is connected, and then disconnect the TouchPad
cable from the system board.
2.
Release the ZIF connector
(2)
to which TouchPad cable is connected, and then disconnect the TouchPad
cable from the TouchPad.
3.
Release the piece of tape
(3)
that secures the TouchPad cable to the keyboard/top cover.
4.
Remove the TouchPad cable
(4)
.
Reverse this procedure to install the TouchPad cable.
44
Chapter 5
Removal and replacement procedures