HP ENVY 13-ad000 Maintenance and Service Guide - Page 47
Remove the Phillips PM2.5×5.7 screw
![]() |
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Remove the right fan: 1. Disconnect the right fan cable (1) from the system board. 2. Release the tape (2) that secures the right fan to the system board. 3. Remove the Phillips PM2.5×5.7 screw (3) that secures the right fan to the keyboard/top cover. 4. Remove the Phillips PM2.0×2.3 broad head screw (4) that secures the right fan to the keyboard/top cover. 5. Remove the right fan (5). Reverse this procedure to install the fans. Component replacement procedures 39
![](/manual_guide/products/hewlettpackard-envy-13ad000-maintenance-service-guide-e7dd309/47.png)
Remove the right fan:
1.
Disconnect the right fan cable
(1)
from the system board.
2.
Release the tape
(2)
that secures the right fan to the system board.
3.
Remove the Phillips PM2.5×5.7 screw
(3)
that secures the right fan to the keyboard/top cover.
4.
Remove the Phillips PM2.0×2.3 broad head screw
(4)
that secures the right fan to the keyboard/top
cover.
5.
Remove the right fan
(5)
.
Reverse this procedure to install the fans.
Component replacement procedures
39