HP ENVY 13-ad000 Maintenance and Service Guide - Page 61
Release the grounding foil, Loosen the three Phillips PM2.0×6.2 captive screws
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Remove the heat sink (2). NOTE: Steps 3 through 6 apply to computer models equipped with a graphics subsystem with UMA memory. See Steps 1 and 2 for heat sink removal information for computer models equipped with a graphics subsystem with discrete memory. 3. Remove the Mylar shielding (1) that covers the heat sink screws. 4. Release the grounding foil (2) that covers the heat sink screws. 5. Loosen the three Phillips PM2.0×6.2 captive screws (3) that secure the heat sink to the system board. Component replacement procedures 53
2.
Remove the heat sink
(2)
.
NOTE:
Steps 3 through 6 apply to computer models equipped with a graphics subsystem with UMA
memory. See Steps 1 and 2 for heat sink removal information for computer models equipped with a
graphics subsystem with discrete memory.
3.
Remove the Mylar shielding
(1)
that covers the heat sink screws.
4.
Release the grounding foil
(2)
that covers the heat sink screws.
5.
Loosen the three Phillips PM2.0×6.2 captive screws
(3)
that secure the heat sink to the system board.
Component replacement procedures
53