HP ENVY 13-ad000 Maintenance and Service Guide - Page 53
TouchPad, Remove the TouchPad
![]() |
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
TouchPad NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad bracket is available using spare part number 928466-001. The TouchPad cable is available using spare part numbers 928451-001 (for use only on computer models equipped with a graphics subsystem with discrete memory) and 928452-001 (for use only on computer models equipped with a graphics subsystem with UMA memory). Description ClickPad in natural silver finish ClickPad in silk gold finish SecurePad in natural silver finish SecurePad in silk gold finish Spare part number 928488-001 928487-001 928490-001 928489-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 33). Remove the TouchPad: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the piece of tape (2) that secures the TouchPad cable to the keyboard/top cover. 3. Release the piece of tape (3) that secures the TouchPad to the keyboard/top cover. 4. Remove the five Phillips PM2.0×2.3 broad head screws (4) that secure the TouchPad to the keyboard/top cover. 5. Remove the TouchPad bracket (5) . Component replacement procedures 45
![](/manual_guide/products/hewlettpackard-envy-13ad000-maintenance-service-guide-e7dd309/53.png)