HP ENVY 13-ad000 Maintenance and Service Guide - Page 46
Fans, Remove the left fan
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Fans NOTE: The fan spare part kit includes the fan cable. Description Left fan for use only on computer models equipped with a graphics subsystem with discrete memory Right fan for use only on computer models equipped with a graphics subsystem with discrete memory Left fan for use only on computer models equipped with a graphics subsystem with UMA memory Right fan for use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 928459-001 928460-001 928461-001 928462-001 Before removing the fans, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Disconnect the battery cable from the system board (see Battery on page 33). Remove the left fan: 1. Disconnect the left fan cable (1) from the system board. 2. Release the tape (2) that secures the left fan to the system board. 3. Remove the two Phillips PM2.0×3.4 screws (3) that secure the left fan to the keyboard/top cover. 4. Remove the left fan (4). 38 Chapter 5 Removal and replacement procedures