HP ENVY 13-ad000 Maintenance and Service Guide - Page 65
Wireless antenna, System board see
![]() |
View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Wireless antenna NOTE: The Wireless Antenna Kit includes the left and right wireless antenna cables and transceivers. Description For use only on computer models equipped with a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 937093-001 936025-001 Before removing the wireless antenna, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Remove the bottom cover (see Bottom cover on page 30), and then remove the following components: a. Battery (see Battery on page 33) b. Solid-state drive (see Solid-state drive on page 34) c. WLAN module (see WLAN module on page 35) d. Fans (see Fans on page 38) e. System board (see System board on page 47) Remove the wireless antenna: 1. Release the tape (1) that secures the wireless antenna cables to the keyboard/top cover. 2. Detach the wireless antenna transceivers (2) from the keyboard/top cover. (The wireless antenna transceivers are attached to the keyboard/top cover with double-sided adhesive.) Component replacement procedures 57
![](/manual_guide/products/hewlettpackard-envy-13ad000-maintenance-service-guide-e7dd309/65.png)