HP ENVY 13-ad000 Maintenance and Service Guide - Page 42

Solid-state drive, Remove the Phillips PM2.0×3.4 screw

Get HP ENVY 13-ad000 PDF manuals and user guides View all HP ENVY 13-ad000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Solid-state drive Description 1-TB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC 512-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC 512-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive 360-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC 256-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC 256-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive 128-GB, 2280 M.2, SATA-3 solid-state drive with TLC 128-GB, 2280 M.2, SATA-3 solid-state drive Spare part number 865697-007 847110-017 933706-002 917818-003 847109-021 933705-002 759848-016 827560-044 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Disconnect the battery cable from the system board (see Battery on page 33). Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.4 screw (1) that secures the drive to the keyboard/top cover. 2. Remove the drive (2) by pulling it away from the connector. NOTE: Solid-state drives are designed with notches to prevent incorrect insertion. 34 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Solid-state drive
Description
Spare part number
1-TB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC
865697-007
512-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC
847110-017
512-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive
933706-002
360-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC
917818-003
256-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive with TLC
847109-021
256-GB, 2280 M.2, PCIe3×4, NVMe solid-state drive
933705-002
128-GB, 2280 M.2, SATA-3 solid-state drive with TLC
759848-016
128-GB, 2280 M.2, SATA-3 solid-state drive
827560-044
Before removing the solid-state drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
30
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
33
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.4 screw
(1)
that secures the drive to the keyboard/top cover.
2.
Remove the drive
(2)
by pulling it away from the connector.
NOTE:
Solid-state drives are designed with notches to prevent incorrect insertion.
34
Chapter 5
Removal and replacement procedures