HP ENVY 13-ag0000 Maintenance and Service Guide - Page 38
Solid-state drive, Remove the Phillips M2.0×3.0 screw
View all HP ENVY 13-ag0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Solid-state drive Description 1-TB, PCIe, TLC 512-GB, PCIe, TLC 512-GB, PCIe, value 256-GB, PCIe, TLC 256-GB, PCIe, value 128-GB, SATA-3, TLC Solid-state drive Mylar shield Spare part number L19583-001 L19582-001 L19585-001 L19580-001 L19584-001 L19579-001 L19790-001 (Foil Kit) Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Disconnect the battery (see Battery on page 27). Remove the solid-state drive module: 1. Remove the Mylar shield from on top of the module (1). NOTE: The Mylar shield is available in the Foil Kit, spare part number L19790-001. 2. Remove the Phillips M2.0×3.0 screw (2) that secures the module to the computer. 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts