HP ENVY 13-ag0000 Maintenance and Service Guide - Page 59
Power connector cable
View all HP ENVY 13-ag0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Power connector cable Description Power connector cable Spare part number L19588-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 27). 6. Remove the system board (see System board on page 46). Remove the power connector cable: 1. Position the system board with the power connector toward you. 2. Disconnect the power connector cable from the system board. Reverse this procedure to install the power connector cable. Component replacement procedures 51