HP ENVY 13-ag0000 Maintenance and Service Guide - Page 48
TouchPad, Remove the bracket
![]() |
View all HP ENVY 13-ag0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
TouchPad Description TouchPad TouchPad cable TouchPad bracket Spare part number L19594-001 L19597-001 L19788-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 27). Remove the TouchPad: 1. Remove the four Phillips M2.0×2.5 screws (1) that secure the TouchPad bracket to the computer. 2. Remove the bracket (2) . 3. Disconnect the cable from the ZIF connector on the TouchPad (1). 4. Remove the conductive tape from the TouchPad (2). 5. Remove the three Phillips M2.0×2.0 broad head screws (3) that secure the TouchPad to the computer. 40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-envy-13ag0000-maintenance-service-guide-801743d/48.png)