HP ENVY 14-u000 ENVY 14 Notebook PC Maintenance and Service Guide - Page 75
Subwoofer, Remove the two Phillips PM2.5×4.0 screws
View all HP ENVY 14-u000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Subwoofer Description Subwoofer Spare part number 767375-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 31), and then remove the following components: a. Optical drive (see Optical drive on page 32) b. Top cover (see Top cover on page 39) c. Power connector cable (see Power connector cable on page 63) d. System board (see System board on page 52) Remove the subwoofer: ▲ Remove the two Phillips PM2.5×4.0 screws (1) and then remove the subwoofer (2). NOTE: The subwoofer connection cable was removed when removing the system board. Reverse this procedure to install the subwoofer. Component replacement procedures 65