HP ENVY 14t-u000 HP ENVY 14 Notebook PC Maintenance and Service Guide - Page 51
Hard drive, The USB/audio
View all HP ENVY 14t-u000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive rubber bracket, hard drive connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 767247-001. Description 500 GB, 5400 rpm, 9.5 mm 750 GB, 5400 rpm, 9.5 mm 1 TB, 5400 rpm, 9.5 mm 1.5 TB, 5400 rpm, 9.5 mm 1 TB, 5400 rpm + 8 GB NAND hybrid, 9.5 mm 750 GB 5400 rpm + 8 GB NAND hybrid, 9.5 mm Spare part number 778188-005 778190-005 778192-005 747375-005 731999-005 732001-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 29) b. Top cover (see Top cover on page 37) Remove the hard drive: 1. Disconnect the USB/audio cable (1) by flipping open the connector and lifting the cable. Lift up front of the USB/audio board (2), and then remove the USB/audio board (3). The USB/audio board spare part number is 767370-001. Component replacement procedures 41