HP ENVY 14t-u000 HP ENVY 14 Notebook PC Maintenance and Service Guide - Page 54
TouchPad button board, Remove the two Phillips PM4.5x2.0 broadhead screws
View all HP ENVY 14t-u000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3. Remove the power button board (2) with cable (the cable was disconnected from the system board when removing the top cover). Reverse this procedure to install the power button board. TouchPad button board Description TouchPad button board (includes cable) Spare part number 767369-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 29) b. Top cover (see Top cover on page 37) Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two Phillips PM4.5x2.0 broadhead screws (1) that secure the TouchPad button board bracket to the top cover. 3. Remove the TouchPad button board, carefully lifting the cable through the top cover (2) (the cable was disconnected from the system board when removing the top cover). 44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts