HP ENVY 14t-u000 HP ENVY 14 Notebook PC Maintenance and Service Guide - Page 69
Speakers, Power connector cable see
View all HP ENVY 14t-u000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Speakers Description Speakers Spare part number 767262-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 29) b. Top cover (see Top cover on page 37) c. Power connector cable (see Power connector cable on page 58) d. System board (see System board on page 48) Remove the speakers: ▲ Lift the speaker cable (1) and then remove the speakers (2). NOTE: The speaker connection cable was removed when removing the system board. Reverse this procedure to install the speakers. Component replacement procedures 59