HP ENVY 15-u010dx HP ENVY x360 Convertible PC Maintenance and Service Guide - Page 41

TouchPad board, that secure the TouchPad board to

Get HP ENVY 15-u010dx PDF manuals and user guides View all HP ENVY 15-u010dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

TouchPad board Description Touchpad board (includes cable) Spare part number 774598-001 Before removing the touchpad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 28). Remove the touchpad board: 1. Position the top cover upside-down. 2. Remove the three Phillips PM2.0×2.0 broadhead screws (1) that secure the TouchPad board to the computer. 3. Lift to disengage the cable from the adhesive securing it to the computer (2). 4. Separate the touchpad board from the top cover by pulling it downward away from the top cover (3). Reverse this procedure to install the touchpad board. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
TouchPad board
Description
Spare part number
Touchpad board (includes cable)
774598-001
Before removing the touchpad board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
Top cover
on page
28
).
Remove the touchpad board:
1.
Position the top cover upside-down.
2.
Remove the three Phillips PM2.0×2.0 broadhead screws
(1)
that secure the TouchPad board to the
computer.
3.
Lift to disengage the cable from the adhesive securing it to the computer
(2)
.
4.
Separate the touchpad board from the top cover by pulling it downward away from the top cover
(3)
.
Reverse this procedure to install the touchpad board.
Component replacement procedures
33