HP ENVY 15-u010dx HP ENVY x360 Convertible PC Maintenance and Service Guide - Page 50
USB/audio board, Disconnect the speaker cable from the USB/audio board
View all HP ENVY 15-u010dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
USB/audio board Description USB/audio board (includes cable) Spare part number 774600-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the top cover (see Top cover on page 28). To remove the USB/audio board: 1. Disconnect the USB/audio cable from the system board (1). 2. Disconnect the speaker cable from the USB/audio board (2). 3. Remove the Phillips PM2.5×4.0 screw (3). 4. Lift the USB/audio board and cable from the computer (4). Reverse this procedure to install the USB/audio board. 42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts