HP ENVY 15-u010dx HP ENVY x360 Convertible PC Maintenance and Service Guide - Page 51

Fan, You do not have to remove the heat sink to remove the fan.

Get HP ENVY 15-u010dx PDF manuals and user guides View all HP ENVY 15-u010dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Fan Description Fan Spare part number 778793-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 28). 5. Disconnect the battery. Remove the fan: NOTE: You do not have to remove the heat sink to remove the fan. 1. Disconnect the fan cable (1) from the system board. 2. Remove the three Phillips PM2.5×4.0 screws (2) that secure the fan to the computer. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Fan
Description
Spare part number
Fan
778793-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
Top cover
on page
28
).
5.
Disconnect the battery.
Remove the fan:
NOTE:
You do not have to remove the heat sink to remove the fan.
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×4.0 screws
(2)
that secure the fan to the computer.
Component replacement procedures
43