HP ENVY 17-s000 Maintenance and Service Guide - Page 33

Optical drive, Remove the Phillips PM2.5×7.0 screw

Get HP ENVY 17-s000 PDF manuals and user guides View all HP ENVY 17-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

3. Rotate the battery upward (3), and then remove the battery from the computer (4). HP Confidential Reverse this procedure to install the battery. Optical drive Description Optical drive (DVD±RW Double-Layer SuperMulti) Spare part number 809304-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). Remove the optical drive: 1. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer. Component replacement procedures 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
3.
Rotate the battery upward
(3)
, and then remove the battery from the computer
(4)
.
Reverse this procedure to install the battery.
Optical drive
Description
Spare part number
Optical drive
(DVD±RW Double-Layer SuperMulti)
809304-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
24
).
Remove the optical drive:
1.
Remove the Phillips PM2.5×7.0 screw
(1)
that secures the optical drive to the computer.
HP
Confidential
Component replacement procedures
25