HP ENVY 17-s000 Maintenance and Service Guide - Page 55
Speakers, Release the speaker cable from the clip built into the keyboard/top cover
View all HP ENVY 17-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Reverse this procedure to install the USB/audio board. Speakers Description Speakers (includes left and right speakers and cable) HP Confidential Spare part number 809316-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the optical drive (see Optical drive on page 25). 6. Remove the bottom cover (see Bottom cover on page 28). 7. Remove the system board (see System board on page 40). Remove the speakers: 1. Release the speaker cable from the clip built into the keyboard/top cover (1). 2. Remove the display cable (2) from the channel (3) at the top of the left speaker. 3. Remove the two Phillips screws (4) 4. Remove the speakers (5). Component replacement procedures 47