HP ENVY 17-s000 Maintenance and Service Guide - Page 54
USB/audio board, to which the USB/audio board cable is connected, and then disconnect
View all HP ENVY 17-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
HP Confidential USB/audio board Description USB/audio board (includes cable) USB/audio board cable Spare part number 844489-001 844490-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the optical drive (see Optical drive on page 25). 6. Remove the bottom cover (see Bottom cover on page 28). Remove the USB/audio board: 1. Release the ZIF connector (1) to which the USB/audio board cable is connected, and then disconnect the USB/audio board cable from the USB/audio board. 2. Release the ZIF connector (2) to which the power button board cable is connected, and then disconnect the power button board cable from the USB/audio board. 3. Remove the two Phillips PM2.5×3.0 screws (3) that secure the USB/audio board to the computer. 4. Remove the USB/audio board (4). 46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts