HP ENVY 17-s000 Maintenance and Service Guide - Page 42
sleeves must be installed on the antenna connectors, as shown in the following illustration.
View all HP ENVY 17-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
HP Confidential 3. Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
Remove the WLAN module by pulling the module away from the slot at an angle
(3)
.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
HP
Confidential
34
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts