HP ENVY 17-s000 Maintenance and Service Guide - Page 47

Optical drive cable, Release the ZIF connector

Get HP ENVY 17-s000 PDF manuals and user guides View all HP ENVY 17-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

HP Confidential Optical drive cable NOTE: The optical drive cable is included in the Cable Kit, spare part number 810928-001. Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the optical drive (see Optical drive on page 25). 6. Remove the bottom cover (see Bottom cover on page 28). Remove the optical drive cable: 1. Release the ZIF connector (1) to which the optical drive cable is connected, and then disconnect the optical drive cable from the system board. 2. Remove the two Phillips PM2.5×3.0 screws (2) that secure the optical drive cable to the computer. 3. Remove the optical drive cable (3). Reverse this procedure to install the optical drive cable. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Optical drive cable
NOTE:
The optical drive cable is included in the Cable Kit, spare part number 810928-001.
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
24
).
5.
Remove the optical drive (see
Optical drive
on page
25
).
6.
Remove the bottom cover (see
Bottom cover
on page
28
).
Remove the optical drive cable:
1.
Release the ZIF connector
(1)
to which the optical drive cable is connected, and then disconnect
the optical drive cable from the system board.
2.
Remove the two Phillips PM2.5×3.0 screws
(2)
that secure the optical drive cable to the computer.
3.
Remove the optical drive cable
(3)
.
Reverse this procedure to install the optical drive cable.
HP
Confidential
Component replacement procedures
39