HP ENVY m6-n000 ENVY m6 Notebook PC Maintenance and Service Guide - Page 38
WLAN module, that secures the service cover to the computer.
View all HP ENVY m6-n000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
WLAN module Description Qualcomm Atheros AR9565 802.11b/g/n 1×1 WiFi + BT 4.0 Combo Adapter Spare part number 733476-001 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29). Remove the WLAN module: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Loosen the Phillips PM2.5×5.0 captive screw (1) that secures the service cover to the computer. 4. Lift the back edge of the service cover (2) until it detaches from the computer. 5. Remove the service cover (3). The service cover is available using spare part number 720555-001. 6. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. 30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts