HP ENVY m6-n000 ENVY m6 Notebook PC Maintenance and Service Guide - Page 47
Remove the base enclosure
View all HP ENVY m6-n000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Remove the following screws: (1) Two Phillips PM2.5×5.5 screws under the front edge of the service cover (2) Three Phillips PM2.5×3.0 screws in the hard drive bay (3) Seven Phillips PM1.5×2.0 screws in the battery bay 5. Remove the base enclosure. Component replacement procedures 39
4.
Remove the following screws:
(1)
Two Phillips PM2.5×5.5 screws under the front edge of the service cover
(2)
Three Phillips PM2.5×3.0 screws in the hard drive bay
(3)
Seven Phillips PM1.5×2.0 screws in the battery bay
5.
Remove the base enclosure.
Component replacement procedures
39