HP ENVY m6-n000 ENVY m6 Notebook PC Maintenance and Service Guide - Page 68
Keyboard, Rear speaker see
View all HP ENVY m6-n000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Keyboard NOTE: The keyboard spare part kit includes a keyboard cable. For use in country/region Spare part number Keyboard in natural silver finish with backlight (includes keyboard cable and backlight cable): For use in Canada 760743-DB1 For use in the United States 760743-001 Before removing the keyboard, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Service cover (see WLAN module on page 30) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 38) d. System board (see System board on page 43) e. Connector board (see Connector board on page 51) f. Subwoofer (see Subwoofer on page 53) g. Rear speaker (see Speakers on page 55) h. Power button board (see Power button board on page 59) Remove the keyboard: 1. Remove the seven Phillips PM2.0×2.9 screws (1) that secure the keyboard shield to the computer. 2. Release the ground loop tape (2). 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts