HP ENVY m6-n000 ENVY m6 Notebook PC Maintenance and Service Guide - Page 67

Power button board, Remove the Phillips PM2.0×2.9 screw

Get HP ENVY m6-n000 PDF manuals and user guides View all HP ENVY m6-n000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Power button board Description Power button board (includes cable) Spare part number 720553-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Service cover (see WLAN module on page 30) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 38) d. System board (see System board on page 43) Remove the power button board: 1. Detach the power button board cable (1) from the top cover. (The power button board cable is attached to the top cover with double-sided tape.) 2. Remove the Phillips PM2.0×2.9 screw (2) that secures the power button board to the top cover. 3. Release the clip (3) that secures the power button board to the top cover. 4. Remove the power button board (4). Reverse this procedure to install the power button board. Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Power button board
Description
Spare part number
Power button board (includes cable)
720553-001
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
29
), and then remove the following components:
a.
Service cover (see
WLAN module
on page
30
)
b.
Hard drive (see
Hard drive
on page
32
)
c.
Base enclosure (see
Base enclosure
on page
38
)
d.
System board (see
System board
on page
43
)
Remove the power button board:
1.
Detach the power button board cable
(1)
from the top cover. (The power button board cable is attached
to the top cover with double-sided tape.)
2.
Remove the Phillips PM2.0×2.9 screw
(2)
that secures the power button board to the top cover.
3.
Release the clip
(3)
that secures the power button board to the top cover.
4.
Remove the power button board
(4)
.
Reverse this procedure to install the power button board.
Component replacement procedures
59