HP EliteBook 1000 Maintenance and Service Guide - Page 48
Solid-state drive - g2
View all HP EliteBook 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Solid-state drive Description 128 GB M2 SATA 3 TLC 256 GB SATA 3 Self-encrypting drive OPAL2 TLC 256 GB Turbo drive G2 TLC 360 GB Turbo drive G2 TLC 512GB PCIE NVME TLC 1 TB PCIE NVME TLC Spare part number L02260-001 L02262-001 L02263-001 L02266-001 L02264-001 L02261-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the solid-state drive, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 34), and then remove the following components: a. Battery(see Battery on page 35). b. Front speakers (see Front speakers on page 36). c. WWAN module (see WWAN module on page 38). Remove the solid-state drive: ▲ Remove 1 M2*2-I screw (1), and then remove the solid-state drive from the connector (2). Reverse this procedure to install the solid-state drive. 40 Chapter 5 Removal and replacement procedures for authorized service provider parts