HP EliteBook 1000 Maintenance and Service Guide - Page 58
Thermal vent
View all HP EliteBook 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Thermal vent Description Thermal vent Spare part number L02238-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the RTC battery, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 34), and then remove the following components: a. Battery(see Battery on page 35). b. System board (see System board on page 41). c. Display assembly (see Display assembly on page 48). Remove the thermal vent: ▲ Remove 4 M2.5*4.5 screws (1), and then lift the thermal vent to remove it (2). Reverse this procedure to install the thermal vent. 50 Chapter 5 Removal and replacement procedures for authorized service provider parts