HP EliteBook 8570w HP EliteBook 8570w Mobile Workstation Maintenance and Servi - Page 72
and remove the hard drive, If it is necessary to replace the hard drive bracket
View all HP EliteBook 8570w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3. Loosen the two Phillips captive screws (2) that secure the smart card reader door to the computer. 4. Open the smart card reader door until it rests on its hinges (1). 5. Remove three Phillips spring-loaded screws (2) that secure the hard drive to the computer. 6. Grasp the tab on the hard drive, pull the hard drive to the left (3), and remove the hard drive (4) from the hard drive bay. 7. If it is necessary to replace the hard drive bracket, remove the four Phillips hard drive bracket screws (1) from the sides of the hard drive. 64 Chapter 4 Removal and replacement procedures
3.
Loosen the two Phillips captive screws
(2)
that secure the smart card reader door to the computer.
4.
Open the smart card reader door until it rests on its hinges
(1)
.
5.
Remove three Phillips spring-loaded screws
(2)
that secure the hard drive to the computer.
6.
Grasp the tab on the hard drive, pull the hard drive to the left
(3)
, and remove the hard drive
(4)
from the hard drive bay.
7.
If it is necessary to replace the hard drive bracket, remove the four Phillips hard drive bracket
screws
(1)
from the sides of the hard drive.
64
Chapter 4
Removal and replacement procedures